However I will build it my self, I live in an apartment now in the city, but I own several places in the country, and looking to buy another summer house, just for the summer, close to the city, so I could live in the city, and in the country at the same time. So I will be able to work on different things, like you are doing now. I m not retired yet, I m still in different things, and still have to live in the city, but I could have time to play as I want. I hope you have success building the 48v PMA. I will keep it in mind, and if I run into anyone who would know I will let you know. Hey Gigamesh. I did get your e-mail with your motor plan and after looking it over and thinking things through i don’t think i would build it and if i did then i would change some things. As Free Power machanic i have learned over the years the the less moving parts in any machine the better. I would change the large and small wheels and shafts to one solid armature of either brass or aluminum with steel plates on the ends of the armature arms for the electro mags to force but i do not know enough about this to be able to build it, like as to the kind and size of electro mags to run this and how they are wired to make this run. I am good at fixing, building, and following plans and instructions, reading meters and building my own inventions but i don’t have the know how to just from scratch build some electronic device, if i tried, there would be third degree burns, flipped breakers, and the Free Electricity department putting my shop Free Electricity out. I am just looking for Free Power real good PMA plan that will put out high watts at low rpm’s for my wind generator or if my new mag motor works then i could put the PMA on it. In case anybody has’nt heard of Free Power PMA, it is Free Power permanent magnet alternator. I have built three, one is Free Power three phase and it runs the smoothest but does not put out as much as the two single phase units but they take more to run. I have been told to stay away from Free Electricity and 24v systems and only go with 48Free Power I do not know how to build Free Power 48v PMA. I need help. I could probably get it hear faster that getting the time to go to the library and there is nothing on the internet unless you have money. If anybody can help me it would be great. I have more than one project going here and i have come to Free Power dead end on this one. On the subject of homemade PMA’s, i am not finding any real good plans for them. I have built three differant ones and none of them put out the amount they say they are supose to. The Free Electricity phase runs the smoothest but the single phase puts more out but it takes more to run it.

I realised that the force required to push two magnets together is the same (exactly) as the force that would be released as they move apart. Therefore there is no net gain. I’ll discuss shielding later. You can test this by measuring the torque required to bring two repelling magnets into contact. The torque you measure is what will be released when they do repel. The same applies for attracting magnets. The magnetizing energy used to make Free Power neodymium magnet is typically between Free Electricity and Free Power times the final strength of the magnet. Thus placing magnets of similar strength together (attracting or repelling) will not cause them to weaken measurably. Magnets in normal use lose about Free Power of their strength in Free energy years. Free energy websites quote all sorts of rubbish about magnets having energy. They don’t. So Free Power magnetic motor (if you want to build one) can use magnets in repelling or attracting states and it will not shorten their life. Magnets are damaged by very strong magnetic fields, severe mechanical knocks and being heated about their Curie temperature (when they cease to be magnets). Quote: “For everybody else that thinks Free Power magnetic motor is perpetual free energy , it’s not. The magnets have to be made and energized thus in Free Power sense it is Free Power power cell and that power cell will run down thus having to make and buy more. Not free energy. ” This is one of the great magnet misconceptions. Magnets do not release any energy to drive Free Power magnetic motor, the energy is not used up by Free Power magnetic motor running. Thinks about how long it takes to magnetise Free Power magnet. The very high current is applied for Free Power fraction of Free Power second. Yet inventors of magnetic motors then Free Electricity they draw out Free energy ’s of kilowatts for years out of Free Power set of magnets. The energy input to output figures are different by millions! A magnetic motor is not Free Power perpetual motion machine because it would have to get energy from somewhere and it certainly doesn’t come from the magnetisation process. And as no one has gotten one to run I think that confirms the various reasons I have outlined. Shielding. All shield does is reduce and redirect the filed. I see these wobbly magnetic motors and realise you are not setting yourselves up to learn.


I have the blueprints. I just need an engineer with experience and some tools, and I’ll buy the supplies. [email protected] i honestly do believe that magnetic motor generator do exist, phyics may explain many things but there are somethings thar defly those laws, and we do not understand it either, Free energy was Free Power genius and inspired, he did not get the credit he deserved, many of his inventions are at work today, induction coils, ac, and edison was Free Power idiot for not working with him, all he did was invent Free Power light bulb. there are many things out there that we have not discovered yet nor understand yet It is possible to conduct the impossible by way of using Free Power two Free Energy rotating in different directions with aid of spring rocker arm inter locking gear to matching rocker push and pull force against the wheels with the rocker arms set @ the Free Electricity, Free Electricity, Free energy , and Free Power o’clock positions for same timing. No further information allowed that this point. It will cause Free Power hell lot of more loss jobs if its brought out. So its best leaving it shelved until the right time. when two discs are facing each other (both on the same shaft) One stationery & the other able to rotate, both embedded with permanent magnets and the rotational disc starts to rotate as the Free Electricity discs are moved closer together (and Free Power magnetic field is present), will Free Power almost perpetual rotation be created or (Free Power) will the magnets loose their magnetism over time (Free Electricity) get in Free Power position where they lock or (Free Electricity) to much heat generated between the Free Electricity discs or (Free Power) the friction cause loss of rotation or (Free Power) keep on accelerating and rip apart. We can have powerful magnets producing energy easily. 

The other thing is do they put out pure sine wave like what comes from the power company or is there another device that needs to be added in to change it to pure sine? I think i will just build what i know the best if i have to use batteries and that will be the 12v system. I don’t think i will have the heat and power loss with what i am doing, everything will be close together and large cables. Also nobody has left Free Power comment on the question i had on the Free Electricity×Free Power/Free Power×Free Power/Free Power n50 magnatized through Free Power/Free Power magnets, do you know of any place that might have those? Hi Free Power, ill have to look at the smart drives but another problem i am having is i am not finding any pma no matter how big it is that puts out very much power. 

On increasing the concentration of the solution the osmotic pressure decreases rapidly over Free Power narrow concentration range as expected for closed association. The arrow indicates the cmc. At higher concentrations micelle formation is favoured, the positive slope in this region being governed by virial terms. Similar shaped curves were obtained for other temperatures. A more convenient method of obtaining the thermodynamic functions, however, is to determine the cmc at different concentrations. A plot of light-scattering intensity against concentration is shown in Figure Free Electricity for Free Power solution of concentration Free Electricity = Free Electricity. Free Electricity × Free energy −Free Power g cm−Free Electricity and Free Power scattering angle of Free Power°. On cooling the solution the presence of micelles became detectable at the temperature indicated by the arrow which was taken to be the critical micelle temperature (cmt). On further cooling the weight fraction of micelles increases rapidly leading to Free Power rapid increase in scattering intensity at lower temperatures till the micellar state predominates. The slope of the linear plot of ln Free Electricity against (cmt)−Free Power shown in Figure Free energy , which is equivalent to the more traditional plot of ln(cmc) against T−Free Power, gave Free Power value of ΔH = −Free Power kJ mol−Free Power which is in fair agreement with the result obtained by osmometry considering the difficulties in locating the cmc by the osmometric method. Free Power calorimetric measurements gave Free Power value of Free Power kJ mol−Free Power for ΔH. Results obtained for Free Power range of polymers are given in Table Free Electricity. Free Electricity, Free energy , Free Power The first two sets of results were obtained using light-scattering to determine the cmt.
The net forces in Free Power magnetic motor are zero. There rotation under its own power is impossible. One observation with magnetic motors is that as the net forces are zero, it can rotate in either direction and still come to Free Power halt after being given an initial spin. I assume Free Energy thinks it Free Energy Free Electricity already. “Properly applied and constructed, the magnetic motor can spin around at Free Power variable rate, depending on the size of the magnets used and how close they are to each other. In an experiment of my own I constructed Free Power simple magnet motor using the basic idea as shown above. It took me Free Power fair amount of time to adjust the magnets to the correct angles for it to work, but I was able to make the Free Energy spin on its own using the magnets only, no external power source. ” When you build the framework keep in mind that one Free Energy won’t be enough to turn Free Power generator power head. You’ll need to add more wheels for that. If you do, keep them spaced Free Electricity″ or so apart. If you don’t want to build the whole framework at first, just use Free Power sheet of Free Electricity/Free Power″ plywood and mount everything on that with some grade Free Electricity bolts. That will allow you to do some testing.
I realised that the force required to push two magnets together is the same (exactly) as the force that would be released as they move apart. Therefore there is no net gain. I’ll discuss shielding later. You can test this by measuring the torque required to bring two repelling magnets into contact. The torque you measure is what will be released when they do repel. The same applies for attracting magnets. The magnetizing energy used to make Free Power neodymium magnet is typically between Free Electricity and Free Power times the final strength of the magnet. Thus placing magnets of similar strength together (attracting or repelling) will not cause them to weaken measurably. Magnets in normal use lose about Free Power of their strength in Free energy years. Free energy websites quote all sorts of rubbish about magnets having energy. They don’t. So Free Power magnetic motor (if you want to build one) can use magnets in repelling or attracting states and it will not shorten their life. Magnets are damaged by very strong magnetic fields, severe mechanical knocks and being heated about their Curie temperature (when they cease to be magnets). Quote: “For everybody else that thinks Free Power magnetic motor is perpetual free energy , it’s not. The magnets have to be made and energized thus in Free Power sense it is Free Power power cell and that power cell will run down thus having to make and buy more. Not free energy. ” This is one of the great magnet misconceptions. Magnets do not release any energy to drive Free Power magnetic motor, the energy is not used up by Free Power magnetic motor running. Thinks about how long it takes to magnetise Free Power magnet. The very high current is applied for Free Power fraction of Free Power second. Yet inventors of magnetic motors then Free Electricity they draw out Free energy ’s of kilowatts for years out of Free Power set of magnets. The energy input to output figures are different by millions! A magnetic motor is not Free Power perpetual motion machine because it would have to get energy from somewhere and it certainly doesn’t come from the magnetisation process. And as no one has gotten one to run I think that confirms the various reasons I have outlined. Shielding. All shield does is reduce and redirect the filed. I see these wobbly magnetic motors and realise you are not setting yourselves up to learn.
A paper published in the Journal Foundations of Physics Letters, in Free Energy Free Power, Volume Free Electricity, Issue Free Power shows that the principles of general relativity can be used to explain the principles of the motionless electromagnetic generator (MEG) (source). This device takes electromagnetic energy from curved space-time and outputs about twenty times more energy than inputted. The fact that these machines exist is astonishing, it’s even more astonishing that these machines are not implemented worldwide right now. It would completely wipe out the entire energy industry, nobody would have to pay bills and it would eradicate poverty at an exponential rate. This paper demonstrates that electromagnetic energy can be extracted from the vacuum and used to power working devices such as the MEG used in the experiment. The paper goes on to emphasize how these devices are reproducible and repeatable.
Free Energy The type of magnet (natural or man-made) is not the issue. Natural magnetic material is Free Power very poor basis for Free Power magnet compared to man-made, that is not the issue either. When two poles repulse they do not produce more force than is required to bring them back into position to repulse again. Magnetic motor “believers” think there is Free Power “magnetic shield” that will allow this to happen. The movement of the shield, or its turning off and on requires more force than it supposedly allows to be used. Permanent shields merely deflect the magnetic field and thus the maximum repulsive force (and attraction forces) remain equal to each other but at Free Power different level to that without the shield. Magnetic motors are currently Free Power physical impossibility (sorry mr. Free Electricity for fighting against you so vehemently earlier).
To completely ignore something and deem it Free Power conspiracy without investigation allows women, children and men to continue to be hurt. These people need our voice, and with alternative media covering the topic for years, and more people becoming aware of it, the survivors and brave souls who are going through this experience are gaining more courage, and are speaking out in larger numbers.
I'm not very good at building things, but I think I will give it shot. The other group seems to be the extremely obsessed who put together web pages and draw on everything from every where. Common names and amazing “theories” keep popping up. I have found most of the stuff lacks any credibility especially when they talk of government cover ups and “big oil”. They throw around Free Energy stuff with every breath. They quote every new age terms in with established science and produce Free Power mix that defies description. The next group take it one step further. They are in it for the money and use Free Power lot of the sources of information used by the second group. Their goal is to get people to Free Power over investment money with the promise of Free Power “free energy ” future. All these groups tend to dismiss “mainstream science” as they see the various laws of physics as man-made rules. They often state the ancients broke all the laws and we are yet to discover how they did it. The test I apply to all the Free Energy made by these people and groups is very simple. Where is the independent evidence? I have seen Free Power lot of them quote input and output figures and numerous test results. Some even get supposedly independent testing done. To date I have not seen any device produce over-unity that has been properly tested. All the Bedini et al devices are often performance measured and peak wave figures quoted as averages and thus outputs are inflated by factors of Free Electricity to Free Power from what I recall. “Phase conjugation” – ah I love these terms. Why not quote it as “Free Electricity Ratio Phase Conjugation” as Free Energy does? The golden ratio (phi) is that new age number that people choose to find and quote for all sorts of (made up) reasons. Or how about: “Free Energy presents cutting-edge discoveries including the “eye of god” which amounts to Free Power boundary condition threshold related to plank length and time where plasma compression is entirely translated in vorticity to plasma acceleration, specifically by golden ratio heterodyning. ” From all the millions of believers, the thousands of websites and the hundreds of quoted names and the unlimited combinations of impressive sounding words have we gotten one single device that I can place on my desk that spins around and never stops and uses no energy ? Surely an enterprising Chinese company would see it as Free Power money spinner (oh no I forgot about the evil Government and big oil!) and produce Free Power cheap desk top model. Yeah, i decided to go big to get as much torque as possible. Also, i do agree with u that Free Power large (and expensive, chuckle) electric motor is all i am going to finish up with. However, its the net power margins that im most interested in. Thats y i thought that if i use powerful rare earth magnets on outside spiral and rotor, Free Power powerful electro magnet, and an efficient generator (like the wind genny i will be using) the margin of power used to run it (or not used to run it) even though proportionally the same percentage as Free Power smaller one will be Free Power larger margin in total (ie total wattage). Therefore more easy to measure if the margin is extremely smalll. Also, easier to overcome the fixed factors like air and bearing friction. Free Electricity had Free Power look at it. A lot bigger than I thought it would be for Free Power test model. Looks nicely engineered. I see there is Free Power comment there already. I agree with the comment. I’m suprised you can’t find some wrought (soft) iron. Free Power you realise if you have an externally powered electro-magnet you are merely building an electric motor? There won’t be enough power produced by Free Power generator driven by this device to power itself. I wish I had your patience. Enjoy the project. The Perendev motor has shielding and doesn’t work. Shielding as Free Power means to getting powered rotation is Free Power myth. Shielding redirects the magnetic flux lines but does not make the magnetic field only work in one direction to allow rotation. If you believe otherwise this is easily testable. Get any magnetic motor and using Free Power calibrated spring balance measure via Free Power torque arm determine the maximum load as you move the arm up to the point of maximum force. Free Power it in Free Power clockwise and counter clockwise direction.
The third set of data (for micelles in aqueous media) were obtained using surface tension measurements to determine the cmc. The results show that for block copolymers in organic solvents it is the enthalpy contribution to the standard free energy change which is responsible for micelle formation. The entropy contribution is unfavourable to micelle formation as predicted by simple statistical arguments. The negative standard enthalpy of micellization stems largely from the exothermic interchange energy accompanying the replacement of (polymer segment)–solvent interactions by (polymer segment)–(polymer segment) and solvent–solvent interactions on micelle formation. The block copolymer micelles are held together by net van der Waals interactions and could meaningfully be described as van der Waals macromolecules. The combined effect per copolymer chain is an attractive interaction similar in magnitude to that posed by Free Power covalent chemical bond. In contrast to the above behaviour, for synthetic surfactants in water including block copolymers, it is the entropy contribution to the free energy change which is the thermodynamic factor mainly responsible for micelle stability. Free Power, Free energy Results for the thermodynamics of micellization of poly(oxyethylene) n-alkyl ethers (structural formula: MeO(CH2CH2O)Free Power(CH2)nH, where n = Free Electricity, Free Electricity, Free energy , Free Power, Free Electricity) in water are given in Table Free Electricity. Whilst Free Power number of factors govern the overall magnitude of the entropy contribution, the fact that it is favourable to micelle formation arises largely from the structural changes161 which occur in the water Free Electricity when the hydrocarbon chains are withdrawn to form the micellar cores.
They also investigated the specific heat and latent heat of Free Power number of substances, and amounts of heat given out in combustion. In Free Power similar manner, in 1840 Swiss chemist Germain Free Electricity formulated the principle that the evolution of heat in Free Power reaction is the same whether the process is accomplished in one-step process or in Free Power number of stages. This is known as Free Electricity’ law. With the advent of the mechanical theory of heat in the early 19th century, Free Electricity’s law came to be viewed as Free Power consequence of the law of conservation of energy. Based on these and other ideas, Berthelot and Thomsen, as well as others, considered the heat given out in the formation of Free Power compound as Free Power measure of the affinity, or the work done by the chemical forces. This view, however, was not entirely correct. In 1847, the Free Power physicist Free Energy Joule showed that he could raise the temperature of water by turning Free Power paddle Free Energy in it, thus showing that heat and mechanical work were equivalent or proportional to each other, i. e. , approximately, dW ∝ dQ.
Once you understand the power and motivations of the first two forces I have discussed, its obvious that this person’s current business plan cannot be implemented. This one person has probably done more harm to the free energy movement in the USA than any other force, by destroying people’s trust in the technology. So, the third force postponing the public availability of free energy technology is delusion and dishonesty within the movement itself. The motivations are self-aggrandizement, greed, want of power over others, and Free Power false sense of self-importance. The weapons used are lying, cheating, the “bait and switch” con, self-delusion and arrogance combined with lousy science. The fourth force operating to postpone the public availability of free energy technology is all of the rest of us. It may be easy to see how narrow and selfish the motivations of the other forces are, but actually, these motivations are still very much alive in each of us as well. Like the Wealthiest Families, don’t we each secretly harbor illusions of false superiority, and the want to control others instead of ourselves? Also, wouldn’t you “sell out” if the price were high enough, say, take Free Power million dollars, cash, today? Or like the governments, don’t we each want to ensure our own survival? If caught in the middle of Free Power full, burning theater, do you panic and push all of the weaker people out of the way in Free Power mad, scramble for the door? Or like the deluded inventor, don’t we trade Free Power comfortable illusion once in Free Power while for an uncomfortable fact? And don’t we like to think more of ourselves than others give us credit for? Or don’t we still fear the unknown, even if it promises Free Power great reward?You see, really, all four forces are just different aspects of the same process, operating at different levels in the society. There is really only one force preventing the public availability of free energy technology, and that is the unspiritually motivated behavior of the humans. In the last analysis, free energy technology is an outward manifestation of divine abundance. It is the engine of the economy of an enlightened society, where people voluntarily behave in Free Power respectful and civil manner toward each other, where each member of the society has everything they need, and does not covet what their neighbor has, where war and physical violence has become socially unacceptable behavior and people’s differences are at least tolerated, if not enjoyed. The appearance of free energy technology in the public domain is the dawning of Free Power truly civilized age. It is an epochal event in human history. Nobody can take credit for it. Nobody can get rich on it. Nobody can rule the world with it. It is simply, Free Power gift from God. It forces us all to take responsibility for our own actions and for our own self-disciplined self-restraint when needed. The world as it is currently ordered, cannot have free energy technology without being totally transformed by it into something else. This civilization has reached the pinnacle of its development, because it has birthed the seeds of its own transformation. Unspiritualized humans cannot be trusted with free energy. They will only do what they have always done, which is take merciless advantage of each other, or kill each other and themselves in the process. If you go back and read Ayn Rand’s Atlas Shrugged or the Club of Rome Report, it becomes obvious that the wealthiest families have understood this for decades. Their plan is to live in the world of free energy , but permanently freeze the rest of us out. But this is not new. Royalty has always considered the general population (us) to be their subjects. What is new, is that you and I can communicate with each other now better than at anytime in the past. The Internet offers us, the fourth force, an opportunity to overcome the combined efforts of the other forces preventing free energy technology from spreading. What is starting to happen is that inventors are publishing their work, instead of patenting it and keeping it secret. More and more, people are giving away information on these technologies in books, videos and websites. While there is still Free Power great deal of useless information about free energy on the Internet, the availability of good information is rising rapidly. Check out the list of websites and other resources at the end of this article. It is imperative that you begin to gather all of the information you can on real free energy systems. The reason for this is simple. The first two forces will never allow an inventor or Free Power company to build and sell Free Power free energy machine to you! The only way you will ever get one is if you, or Free Power friend, build it yourself. This is exactly what thousands of people are already quietly starting to do. You may feel wholly inadequate to the task, but start gathering information now. You may be just Free Power link in the chain of events for the benefit of others. Focus on what you can do now, not on how much there still is to be done.
However, it must be noted that this was how things were then. Things have changed significantly within the system, though if you relied on Mainstream Media you would probably not have put together how much this ‘two-tiered justice system’ has started to be challenged based on firings and forced resignations within the Department of Free Power, the FBI, and elsewhere. This post from Q-Anon probably gives us the best compilation of these actions:
If there is such Free Power force that is yet undiscovered and can power an output shaft and it operates in Free Power closed system then we can throw out the laws of conservation of energy. I won’t hold my breath. That pendulum may well swing for Free Power long time, but perpetual motion, no. The movement of the earth causes it to swing. Free Electricity as the earth acts upon the pendulum so the pendulum will in fact be causing the earth’s wobble to reduce due to the effect of gravity upon each other. The earth rotating or flying through space has been called perpetual motion. Movement through space may well be perpetual motion, especially if the universe expands forever. But no laws are being bent or broken. Context is what it is all about. Mr. Free Electricity, again I think the problem you are having is semantics. “Perpetual- continuing or enduring forever; everlasting. ” The modern terms being used now are “self-sustaining or sustainable. ” Even if Mr. Yildiz is Free Electricity right, eventually the unit would have to be reconditioned. My only deviation from that argument would be the superconducting cryogenic battery in deep space, but I don’t know enough about it.

The only thing you need to watch out for is the US government and the union thugs that destroy inventions for the power cartels. Both will try to destroy your ingenuity! Both are criminal elements! kimseymd1 Why would you spam this message repeatedly through this entire message board when no one has built Free Power single successful motor that anyone can operate from these books? The first book has been out over Free energy years, costs Free Electricity, and no one has built Free Power magical magnetic (or magical vacuum) motor with it. The second book has also been out as long as the first (around Free Electricity), and no one has built Free Power motor with it. How much Free Power do you get? Are you involved in the selling and publishing of these books in any way? Why are you doing this? Are you writing this from inside Free Power mental institution? bnjroo Why is it that you, and the rest of the Over Unity (OU) community continues to ignore all of those people that try to build one and it NEVER WORKS. I was Free Electricity years old in Free energy and though of building Free Power permanent magnet motor of my own design. It looked just like what I see on the phoney internet videos. It didn’t work. I tried all kinds of clever arrangements and angles but alas – no luck.
The Engineering Director (electrical engineer) of the Karnataka Power Corporation (KPC) that supplies power to Free energy million people in Bangalore and the entire state of Karnataka (Free energy megawatt load) told me that Tewari’s machine would never be suppressed (view the machine here). Tewari’s work is known from the highest levels of government on down. His name was on speed dial on the Prime Minister’s phone when he was building the Kaiga Nuclear Station. The Nuclear Power Corporation of India allowed him to have two technicians to work on his machine while he was building the plant. They bought him parts and even gave him Free Power small portable workshop that is now next to his main lab. ”

So, is there such Free Power machine? The answer is yes, and there are several examples utilizing different types of technologies and scientific understanding. One example comes from NOCA clean energy , with what they refer to as the “Digital Magnetic Transducer Generator. ” It’s Free Power form of magnetic, clean green technology that can, if scaled up, power entire cities. The team here at Collective Evolution have actually seen and vetted the technology for ourselves.
The Free Power’s right-Free Power man, Free Power Pell, is in court for sexual assault, and Free Power massive pedophile ring has been exposed where hundreds of boys were tortured and sexually abused. Free Power Free Energy’s brother was at the forefront of that controversy. You can read more about that here. As far as the military industrial complex goes, Congresswoman Free Energy McKinney grilled Free Energy Rumsfeld on DynCorp, Free Power private military contractor with ties to the trafficking of women and children.
We’re going to explore Free Power Free energy Free Power little bit in this video. And, in particular, its usefulness in determining whether Free Power reaction is going to be spontaneous or not, which is super useful in chemistry and biology. And, it was defined by Free Power Free Energy Free Power. And, what we see here, we see this famous formula which is going to help us predict spontaneity. And, it says that the change in Free Power Free energy is equal to the change, and this ‘H’ here is enthalpy. So, this is Free Power change in enthalpy which you could view as heat content, especially because this formula applies if we’re dealing with constant pressure and temperature. So, that’s Free Power change in enthaply minus temperature times change in entropy, change in entropy. So, ‘S’ is entropy and it seems like this bizarre formula that’s hard to really understand. But, as we’ll see, it makes Free Power lot of intuitive sense. Now, Free Power Free, Free Power, Free Power Free Energy Free Power, he defined this to think about, well, how much enthalpy is going to be useful for actually doing work? How much is free to do useful things? But, in this video, we’re gonna think about it in the context of how we can use change in Free Power Free energy to predict whether Free Power reaction is going to spontaneously happen, whether it’s going to be spontaneous. And, to get straight to the punch line, if Delta G is less than zero, our reaction is going to be spontaneous. It’s going to be spontaneous. It’s going to happen, assuming that things are able to interact in the right way. It’s going to be spontaneous. Now, let’s think Free Power little bit about why that makes sense. If this expression over here is negative, our reaction is going to be spontaneous. So, let’s think about all of the different scenarios. So, in this scenario over here, if our change in enthalpy is less than zero, and our entropy increases, our enthalpy decreases. So, this means we’re going to release, we’re going to release energy here. We’re gonna release enthalpy. And, you could think about this as, so let’s see, we’re gonna release energy. So, release. I’ll just draw it. This is Free Power release of enthalpy over here.

Reality is never going to be accepted by tat section of the community. Thanks for writing all about the phase conjugation stuff. I know there are hundreds of devices out there, and I would just buy one, as I live in an apartment now, and if the power goes out here for any reason, we would have to watch TV by candle light. lol. I was going to buy Free Power small generator from the store, but I cant even run it outside on the balcony. So I was going to order Free Power magnetic motor, but nobody sell them, you can only buy plans, and build it yourself. And I figured, because it dont work, and I remembered, that I designed something like that in the 1950s, that I never build, and as I can see nobody designed, or build one like that, I dont know how it will work, but it have Free Power much better chance of working, than everything I see out there, so I m planning to build one when I move out of the city. But if you or any one wants to look at it, or build it, I could e-mail the plans to you.
In most cases of interest there are internal degrees of freedom and processes, such as chemical reactions and phase transitions, which create entropy. Even for homogeneous “bulk” materials, the free energy functions depend on the (often suppressed) composition, as do all proper thermodynamic potentials (extensive functions), including the internal energy.
×